Casing & Tubing
Line & Standard Pipe
Please inquire with your Sales Representative for other AISI grades.
+/- 10% of nominal
Per ASTM A519
Standard lengths of Double (35-45) and Single (17.5 22.5) Randoms are provided. Restricted lengths can be available upon request.
Bare or UV* Coated. MSDS sheets can be provided upon request for coating.
Plain End Beveled, Plain End Square Cut or Uncropped
Non Destructive Examination (NDE) can be provided by Electro Magnetic Inspection (EMI) diverted flux method or through Ultrasonic (UT) inspection. Walls < .500 receive an EMI inspection and walls > .500 receive a UT inspection.
Mill Test Reports
Provided at time of shipment
Order & Shipping
Customer must order the yield of 1 heat (approximately 75 tons) of any OD and wall combination. Quantities above 1 heat must be ordered in heat lot increments.
Truck shipments must have 20-22 tons per load. Rail shipments must have 75-80 tons per load.
+1 713 749 3200